How to determine your ring size:
If you don't know your ring size, we have prepared two ways for you to quickly determine your ring size.

1. Determine your ring size using a ring as a template:
- Choose a ring that fits you well on the finger on which you want to wear the Geometry ring
- Simply measure the inner diameter of the ring using a ruler or caliper gauge
- Compare the measured value with our table and you have your ring size
- Since our rings are rather wide, you should choose 1-2 sizes larger if you have chosen a narrow ring (width up to approx. 4mm) as a template.

2. determine the ring size by measuring a finger:
- Cut a strip of paper (approx. 1 cm wide and 10 cm long)
- Place around the desired finger
- Tighten the strip (not too tight, but not too loose either)
- Make sure that the paper loop also fits over your knuckle! Some people's fingers are thickest at this point.
- Mark where the ends of the paper strip overlap
- Measure the distance between the two marked points
- Length corresponds to the circumference of the ring
- A piece of string or a tape measure can also be used instead of the strip of paper You can of course also go to the jeweller around the corner to have your ring size measured.

Important when determining ring sizes:
- Ring sizes change in the course of life
- it is therefore best to measure directly before purchase
- the fingers of the right and left hand are usually not the same size
- Ring sizes vary depending on the time of day and season
- Do not measure directly after physical activity or sport
- it should also not be too hot or too cold
- We recommend measuring towards the end of the day
- if you are unsure between two sizes, it is best to choose the larger one
- if a ring does not fit, you can of course exchange it within 14 days
We are of course always available to answer any questions you may have! info@fritzandrose.com